Air Flow Dryer

Air Flow Dryer

Air Flow Dryer

Once you loosen the clamp, the tubing should simply slide in and out of place around a pipe in the wall. Take two hands and gently pull on the tubing to remove it, making sure not to tear a hole anywhere. Do the same for the attachment on the dryer end, so that the tubing comes completely free of the wall and the appliance.

1. Remove the dryers vent from the wall. Typically, there is a metal ring clamp that attaches the tubing to the dryer and to the wall, and that you can loosen/tighten with a screwdriver (typically flat head).

Detect dangerous lint build up before it causes damage, potential injury or death. Order DrySafer now and take the first step in protecting your home and family against a potentially deadly dryer fire.

2. Clear the lint free from the screen. The trick here is to just get a small amount of lint to start with. Once you’ve scraped a small bit free from the screen use it to remove the remaining lint. Like a snowball rolling down hill, the lint will attract to itself and aid in the removing process. Once it’s removed, toss the lint into the garbage bag.

A clothes dryer doesn’t look scary or dangerous. Unfortunately, it is the cause of over 20,000 house fires every year totaling millions of dollars in damage. Regular cleaning and maintenance can protect your family and your investment in your home.

This means that ​dryer ducts should also be as straight as possible and cannot be longer than 25 feet. Any 90-degree turns in the duct reduce this 25-foot number by 5 feet, since these turns restrict airflow.

If you still have a white or silver vinyl duct hose, it should be replaced immediately. It is flammable and if ignited by the dryer it will burn and cause a house fire. All national and local building codes now require metal ducting for clothes dryers. Ideally, you should use rigid aluminum tubing pieces between the dryer and the outside vent. This type of tubing does the best job of resisting the collection of lint in the duct and cannot be easily crushed. Flexible aluminum ducting is available, however, it is more prone to collecting lint inside.Air Flow Dryer

Lint is also the leading cause of an average of 4,400 reported dryer fires a year, according to the National Fire Protection Association. DrySafer Dryer Lint Alarm is a unique device that detects insufficient airflow inside the dryer’s exhaust ducts and the dryer’s internal lint filter housing. If the airflow in the dryer becomes restricted because of excessive lint build up, birds nests or other debris, it can cause the dryer to overheat and possibly result in a fire.

Over time lint, (aka “formerly known as your clothes”), will build up in these areas and prevent your dryer from moving air efficiently, causing your dryer to work harder to dry clothes and use more energy in the process. (Of course, if you can hang your clothes to dry, you’ll not have to go through this process nearly as much, and you’ll save a bunch of money. But I digress!)

4. Now use the vacuum to remove any lint from the lint trap. Swap out the attachment on the vacuum for one with a longer neck. Once you’ve done that, turn on the vacuum and put the attachment as far into the lint trap as possible. Now work the attachment around the inside of the trap. The goal here is to remove any and as much of the residual lint as possible. Occasionally, you might want to pull the attachment out (since you won’t be able to see down the trap), and make sure the tip of the vacuum attachment is not clogged, which it often is. If so, just pull out the lint that’s clogging the attachment, put your hand against the end to check that it’s sucking clearly, and reinsert it into the trap.

Follow these easy steps to clean out the lint from your dryer and get it working efficiently. As always, when you’re working on any large appliance, make sure to unplug it first, or shut the power off to it from the breaker box.  Air Flow Dryer

The maximum length of a clothes dryer exhaust duct should not exceed 25 feet from the dryer location to the wall or roof termination. The maximum length of the duct shall be reduced 2.5 feet for each 45-degree bend, and 5 feet for each 90-degree bend. The maximum length of the exhaust duct does not include the transition duct.

The Lint Trap and Screen – Depending on the design of your dryer the lint trap will either be on the top of the dryer or located just inside the door. Be sure to locate the dryer’s lint trap, which houses the lint screen, before continuing.

Using a Drysafer clothes dryer lint trap alarm makes this process easier. DrySafer Dryer Lint Alarm is a unique device that detects insufficient airflow inside the dryer’s exhaust ducts and the dryer’s internal lint filter housing. If the airflow in the dryer becomes restricted because of excessive lint build up, birds nests or other debris, it can cause the dryer to overheat and possibly result in a fire.  Air Flow Dryer

Detect dangerous lint build up before it causes damage, potential injury or death. Order DrySafer now and take the first step in protecting your home and family against a potentially deadly dryer fire.

Thanks to all of your hard work, your dryer should now be running more efficiently. Depending on how often you use your dryer, it’s probably a good idea to perform this service every six months to a year. If you are not the DIY type, you can hire out cleaning your dryer vent with an energy efficiency company.

One last step is to clean the exterior vent. Again remove as much lint as possible using your hand or a shop vacuum. You may need a screwdriver or another tool to hold the vent flap open for easier cleaning. If you live in a high humidity area or use your dryer more than twice weekly, you may need to clean this vent several times per year.

6. Blow it out. Once all the tubing is put back together the way you found it (or better), turn the dryer on for 10-15 seconds. This will blow air out the tubing, which should flush all the lint that you just loosened out the other end of the pipe.

4. Put the dryer’s vent back into place. Now that you’ve cleaned both the vent and piping, take the vent and slide it back into place, and tighten the screws on the clamp on each end to reaffix it firmly.

 

Remove the dryer lint filter. In the opening – whether on the top of the dryer or inside the door, use the brush to gently loosen the built-up lint. Don’t force the brush if you meet resistance but be sure to clean every surface as much as possible.

3. Take your vacuum and clear out any remaining lint. Sometimes the brush just can’t remove all of the lint from either the vent or piping. Take your vacuum and use the long attachment to clear out as much lint as possible.

If possible, clothing that has been soiled by volatile chemicals like gasoline, cleaning agents or even large amounts of cooking oil should not be dried in a clothes dryer. If they must be dried in the machine, wash the clothing more than once to minimize the risk of fire. Use the lowest heat setting and shortest drying cycle possible. Use a cycle with a cool-down period at the end of the cycle to prevent ignition.

Finding ways to reduce home energy costs is a priority for every homeowner today. The Drysafer will help save you money as well as reduce the risk of dryer fire by keeping your dryer duct clean and free of lint. This product acts as a secondary lint trap for your electric clothes dryer. It installs easily onto your dryer transition duct and collects additional lint that is not captured by the standard dryer lint trap. This helps to eliminate unwanted and excess lint within the duct and reduces the risk of a dryer fire occurring. It also allows the air to pass through the duct more easily and without obstruction, saving energy by allowing your dryer to run more smoothly and efficiently. The clear door gives an unobstructed view of the lint screen which should be removed and cleaned after each load of laundry.

5. If possible, go outside and clean the other end of the vent. In some cases the outside of the vent may not be accessible. However, if it is, take your vent brush and repeat step 2 to pull as much lint from this end of the vent as possible.